Identify this car

Noticed that great looking convertible at Sainsbury's a couple of days ago.

Can you identify the car? No prizes sorry.

Read More

The four-stroke engine

The four-stroke engine is also referred to as the Otto cycle engine after its inventor N.A. Otto. Most cars use the four-stroke engine. An individual cycle comprises four strokes: 1, intake stroke; 2, compression stroke; 3, power stroke and 4, exhaust stroke. These four strokes repeat to generate the crankshaft revolution.

1. Intake stroke: the intake stroke draws air and fuel into the combustion chamber. The piston descends in the cylinder bore to evacuate the combustion chamber. When the inlet valve opens, atmospheric pressure forces the air-fuel charge into the evacuated chamber. As a result, the combustible mixture of fuel and air fills the chamber.

2. Compression stroke: at the end of the intake stroke, both inlet and exhaust valves are closed. The inertial action of the crankshaft in turn lifts the piston which compresses the mixture. The ratio of the combustion

chamber volume before and after compression is called the compression ratio. Typically the value is  approximately 9:1 in spark ignition engines and 15:1 in diesel engines.

3. Power stroke: when the piston ascends and reaches top dead center, an electric current ignites the spark plug and as the mixed gas burns, it expands and builds pressure in the combustion chamber. The resulting

pressure pushes the piston down with several tons of force. 4. Exhaust stroke: during the exhaust stroke, the inlet valve remains closed whilst the exhaust valve opens. The moving piston pushes the burned fumes through the now open exhaust port and another intake stroke starts again.

During one cycle, the piston makes two round trips and the crankshaft revolves twice. The inlet and exhaust valves open and close only once. The ignition plug also sparks only once. A petrol engine, whether four- or two-stroke, is called a spark ignition (SI) engine because it fires with an ignition plug. The four-stroke-cycle engine contains the lubricating oil in the crankcase. The oil both lubricates the crankshaft bearings and cools the hot piston.

The science and technology of materials in automotive engines

Hiroshi Yamagata

Woodhead Publishing and Maney Publishing

on behalf of

The Institute of Materials, Minerals & Mining

CRC Press

Boca Raton Boston New York Washington, DC

WOODHEAD PUBLISHING LIMITED

Cambridge England

READ MORE.......

for more details and updates about automotive-technology-guide please visit.........
www.automotive-technology-guide.com

---or---

www.automotive-technology-guide.com

Read More