When we start weak car spark plugs, ignition process in the engine and the car will be running a car crashed into halting. The car that has a spark that was old and weak are usually not easily in starter in the morning and was not powered while driving. Fuel consumption will be higher if the condition of the spark plug is too old. Most spark plugs require replacement every 15 thousand miles or about 24 thousand km.
But usually on new cars that have platinum spark plugs only need to be replaced every 60 thousand miles or about 96 km. If you have an old car, this article will provide input on how to replace your spark plugs properly.
The workings of the two cable plugs are located very close together, making it possible to trigger a spark. Distributor of car engines will continue the flow of electricity that flows through the ceramic casing lining the wire from the spark plug and the other jumped into a grounded wire, to meet the circuit and then start the engine.
When the spark plug was crusty, the electricity would not be a success and will lead to a shortage of cars. This reduction in force will cause some problems with your vehicle, such as the vehicle crashed, halting way, hard in starter and fuel consumption was normal.
To replace the old spark plugs, your vehicle's engine must be cooled first. If your vehicle wears out, wait for approximately two hours after the trip, to make sure it is really cold. To prevent further damage, off your car battery.
Clean the inside of the spark plugs by using a blower. You can use a tire pump or air compressor to clean each cavity to clean dirt, dust or crust. Cleaning the crust by using a blast of air is so important that when the spark plug removed no one falls into the cylinder.
Remove the spark plug wire by turning the rubber cap while pulling. Do not immediately pull the spark plug wires, because it could ruin it. open spark plug from its socket. Spark plug sockets have a rubber coating that will prevent damage to the ceramic casing. Remove the spark plug from the socket by turning it.
Be careful, do not drop anything onto the engine cylinder, piston or head.
Serious damage to the cylinder or head will occur if any foreign object attached to it. New spark plugs in accordance with the specifications of your vehicle's engine must be available. When installing new spark plugs, you should lubricate each spark plug as a treatment step. This will help to further facilitate the replacement of spark plugs.
Required the ability to be able to distinguish each spark plug according to specifications from the manufacturer. You can buy the plugs that match your vehicle at a store that provides genuine spare parts of your vehicle. Install each spark plug in each cylinder on your machine.
Tightly secure new spark plugs, spark plugs you have installed it by using your hands, then by using a key size of a spark plug with spark plugs that you plug it. Install each spark-plug wires on the spark plugs. And then not to forget to change it back after your vehicle mileage has been given above
for more details and updates about automotive-technology-guide please visit.........
www.automotive-technology-guide.com
---or---
