WHEN in the course, all of a sudden the engine temperature rises sharply (overheating). Surely we panic for fear of the vehicle will be totally or even burned to death.
But, actually no need to panic, simply stop the vehicle to the curb, jumped out, and check the condition of the volume of water to the radiator. Be careful when opening the radiator due to high temperatures and open it definitely needs the help of a rag to avoid the heat.
After that do the following steps.
1. Remove the fan motor cable connector (fan) radiator of the holder with a Phillips screwdriver. In a particular car, simply take it off without opening the bolt.
2. Continue by removing the fan motor connector. Separate sockets and cables to the fan motor in a way the player cut it. Connect the new cable at both ends of the cord.
3. Tie the end of the second cable to the battery terminals, the blue wire connected to the positive terminal. While the black wire to the negative pole. When installed, the motor will rotate the fan. Note the direction of the wind. If the exhaled air to the radiator, meaning one put a cable on the battery terminals. Correct, wind bursts leading to the engine.
Way above its emergency / temporary. Immediately contact the nearest garage to replace a defective switch. n E-1
Vibrate at High Speed Vehicles
BE CAREFUL if the car vibrate at high speeds fast or often called "semi". Owners of old cars should be more careful and sensitive to the condition of his car.
Because, old cars usually have damage to the complex problem. One problem that often occurs is the occurrence of a strong vibration throughout the vehicle while driving especially when in high speed.
If left unchecked it is very dangerous. Here is what action you should do and why it happened.
1. Run the vehicle at the speed at which the vibrations were not arise, usually below 60 km / hour. Do not force drove at high speed. Better late origin survived.
2. The cause of the vibrations is due to several things:
- Curved so that the propeller shaft out of balance.
- Wear and tear on the bearings of universal joints.
- Bolts loose connective propeller shaft.
3. Immediately bring the vehicle to the garage for further inspection and repair
for more details and updates about automotive-technology-guide please visit.........
www.automotive-technology-guide.com
---or---
