Bentley unveils 2 new cars

Early this month, Bentley unveiled two new cars, the new Continental GT and GTC V8 models, at the North American International Auto Show, Detroit. The cars are powered by the new 4.0 litre, twin turbocharged V8 and said to offer exceptional standards for power-to-emissions in the high luxury sports car sector.

The new Bentley V8 engine delivers maximum power of 500 bhp (507 PS / 373 Kw) at 6000 rev/min and an extraordinary peak torque of 660 Nm (487 lb ft) which is available across virtually the entire rev range from 1700 to 5000 rev/min, providing exhilarating performance and effortless power delivery in the Bentley tradition. Combined with a new close-ratio 8-speed automatic transmission, this translates into a 0-60 mph sprint time of 4.6 seconds for the GT coupe (0-100 km/h in 4.8 seconds) and a top speed of 188 mph (303 km/h).

The GTC V8 top up

The V8 Continental models achieve outstanding levels of fuel efficiency and CO2 emissions for the luxury performance sector and are capable of travelling over 500 miles (800 km) on a single tank of fuel. This represents a 40 per cent improvement in fuel efficiency and CO2 emissions.

The new car models are distinguished by a black gloss matrix grille with chrome frame and centre bar, a red enamel Bentley badge, and a black matrix three-segment lower front bumper divided by distinctive body-coloured strakes.

20-inch alloy wheels comes as standard on both models with an optional 21 inch six-spoke design which is available in dramatic Diamond Black (exclusive to the Continental V8) or Diamond Silver finishes.

The interior car design continues the fresh, sporting design theme with an Eliade cloth headlining, new contemporary Dark Fiddleback Eucalyptus veneers, optional two-tone leather colour split and short centre console.

Read More

Washing the car itself easily & effectively

Cleaning the car on a regular basis will keep the car from the 'decay' before his time. It is comfortable utilizing the services of Automated car washes. However, if one chose, would risk stripping the wax coating and scratch the paint finish. Risks can be minimized if the activity is done at home.

Finish is a combination of paint and coating materials translucent plate that covers the body of the car. On the new car finish consists of layers of paint that are stacked by a shiny clear coating. Above the protective wax finish usually coated (protective wax). Finish must be preserved intact because it is the main protector of the auto body damage. Once the finish coating is damaged or torn, the body will be easy corrosion.

Always use a clean cotton cloth and gently. Can also wear gloves made specifically for washing cars. Using a cloth carelessly when washing or drying the car will scratch the surface. Park the car quiet place, preferably where the ramps so that washing water flows faster and faster the car dry.

Mulailkan by washing Peleg (wheels):

Liquid cleaners work better on a dry surface. Spray cleaning fluid such as the user. If the dirt is still menepel use a soft brush, do not rub too hard. When using Peleg alloy, make sure the cleaning liquid does not damage the protective layer.

Washing the body:

Flush the entire car body from top to bottom. Better when using a pistol-shaped spray of water that can be arranged power spray. By adjusting the power level bursts, dry dirt can be removed. Do not be too tight because it will push dirt into the finish layer. Do not forget the pit and Peleg sidelines. If there's dirt left use pre-cleaning solution. Pour the liquid on a rag and rubbing in the dirt. Stubborn dirt can be scrubbed a little harder. Be careful, if scratched too hard at risk. Use a special detergent to cars to the finish unprotected. Using dishwasher detergent will strip wax layer.

Pour the detergent into the cleaning bucket of cold water (hot water will melt the wax coating). Follow the instructions usage and comparison detergent and water. Never more, because it will remove more wax. The experience of many people, mixing 75% of the recommended detergent actually produce cleaner cars shiny. Try finding the most appropriate composition of your own.

When the sides of the car is dirtier than the top, hood and trunk, you can use this strategy to minimize the possibility of scratches. First, start cleaning from top to bottom. Second, replace the cloth when it will clean the dirtiest areas.

To clean the roof,

hood and trunk, start by wetting the parts to be washed. Dip a soft cloth into a tub of liquid detergent. Wipe carefully so that the surface is not scratched. Occasionally dip the rag and kucek to dissolve in the liquid detergent feces. Clean all start from the hood to the trunk. Then rinse with running water, do not spray. Never wash one section and then move to other sections and left in a state has not been rinsed. Cleaning fluid will dry and you will begin the process of washing all over again.

When the top is rinsed completely, now turn to the side, grille, and bumpers. Start by rinsing the sections that will be once again in the wash. Start from Fender. Replace the second lap to wash the bottom of the start of the fenders, grille and bumper latter. This is the most dirty parts, so keep it clean with a rag rubbed over and over again. Immediately rinse any part that has been washed.

Drying the car:

Take a clean cotton cloth and dry or synthetic chamois, place it on the surface will be dried. Set aside some time for lap / chamois to absorb water. Replace the other laps and do way as above to absorb the remaining water. Do not dry the surface by rubbing. Do it that way until the entire surface dry. Open the doors, hood and trunk to remove the water that drips into. Good luck.

READ MORE.......

translate fr. Mobilku.com

for more details and updates about automotive-technology-guide please visit.........

www.automotive-technology-guide.com

---or---

www.automotive-technology-guide.com

Read More