Specification tires

Specification tires are often forgotten. In fact, the numbers found on the tire wall is very informative and payers are known.

We can know the tire size, type tubles or not, the rate of speed, maximum carrying capacity and more tire information that we use. Below will explain the meaning of the row number.

Take for example P215/65R15 89H. Let's look at one-one:

Q: For passenger vehicles (passenger)

215: This symbol indicates the tire width is measured from one wall to another. That is, it determines the number of millimeters of tread. The bigger the number, the tire treads will look more broadly.

65: The ratio of height to width. The larger the numbers side of the tire will look higher. The smaller the number the lower the tire wall.

R: Construction of tires. The symbol R represents radial tire type.

15: The diameter of the tire, or better known by the ring 15. Usually correspond to the diameter (ring) wheels.

89: Index Power. Each figure has a different level haulage. It is also associated with the maximum wind pressure of n measured in units of PSI (pounds per square inch) and Kpa (kilopascals).

H: The rate of speed. Each letter has a different speed levels. The rate at which it covers:

- Q maximum speed of 158 km / h

- S maximum speed of 179 km / h

- T maximum speed of 188 km / h

- U maximum speed of 198 km / h

- H maximum speed of 208 km / h

- V maximum speed of 240 km / h

- Z maximum speed above 240 km / h

READ MORE.......

for STEP BY STEP GUIDE autocad simple tutorial please visit.........

www.autocadsimpletutorial.blogspot.com

---or---

www.autocad-simple-tutorial.com

Read More

Fuses

Fuses are part of the electrical system on vehicles. In spite of the small fuse having a function that is large enough. Therefore you should not ignore it.

There are many causes that need your attention in connection with the damage that often befall the vehicle fuse.

1. If the fuse is lost when you turn on the headlights, then the mistake lies on a light switch or there has been a short circuit (short circuit) on the cable.

2. Disconnect the fuse when the vehicle suffered shock. Please you check some of which may have damaged insulation.

3. Blown fuse when you step on the brake pedal. There has been shorted on the part of the buttons and lights.

4. There are times when a fuse abrupt end when you enable large buttons and lights dim. This is because the dimmer button that has been damaged.

5. Blown fuse persnelling after you move in reverse (reverse). This indicates the reverse lights were damaged.

6. Lastly, the fuse is lost when you turn on the lights turn sign. Errors may be located between the buttons and lights sign.

Fix the fuse box:

1. You know there is a burning fuse. Pay attention to the cause soon and do a repair as necessary, then replace the plug fuse new ones.

2. Should a replacement fuse has a capacity in accordance with predetermined. If capacity is exceeded during a short circuit or shorted, the fuse will not be disconnected (burnt). So the cable will receive excessive heat and potentially cause a fire.

3. Holder (holder) who experienced corrosion fuse can cause excessive heat due to its relationship to be weak. This can result in burning fuse. To overcome it, replace it with a new fuse box.

READ MORE.......

for more details and updates about automotive-technology-guide please visit.........

www.automotive-technology-guide.com

---or---

www.automotive-technology-guide.com

Read More