Automotive
When the fun of driving a car is sometimes difficult to compromise. Especially if the problem was located on a machine that "over-heat". Two dintara cause of over-heat the radiator is leaking or the engine cooling system may not work optimally / damaged. For the second constraint mentioned any of the tips that you can do. Minimal car you can move up to the nearest garage.
tips:
1. Open up your car's engine cover and disconnect the cable connecting the AC condenser.
2. Cables AC condenser which has been lost can you connect with a cable machine condenser.
3. When everything is installed, then you do not forget to remove the magnetic compressor. These cables are usually located not far from ac compressors.
4. After all that is done is connected, then you just turn on the following machines ac.
Basically, these tips work with the principle of your vehicle can move back to the cooling system from the AC condenser. So the risk is when your vehicle can move towards the nearest garage, you can not enjoy the cool air conditioning during the trip.
What is written above tips are used for vehicles that use a cooling system elektromotor. And of course it can be done if elektormotor not functioning properly.
While if overheating occurs due to the radiator which worked less than optimal. Do not rush to open the radiator cap. Turn off your engine for a moment and let the radiator cool. Once cool, just open the radiator cap and insert the coolant or water. While filling water into the radiator, make an effort to make the machine alive.
for more details and updates about automotive-technology-guide please visit.........
www.automotive-technology-guide.com
---or---
